ELT TESTER

The aviation industry needed to measure 243 MHz so we created a series of Beacon Testers to address that need. We built on the features of our most popular model (BT100A) and added 243 MHz frequency and power measurements. In addition you can listen to the real-time audio on 121.5 MHz or 243 MHz! The BT100AV series even decodes Morse Code. With the BT100AVtriple you still get the powerful 406 MHz graphic measurements for power, phase modulation and spectrum. To comply with your Quality Assurance requirements, we now include detailed calibration data with each Certificate of Calibration.

The BT100AV series exceeds the measurement requirements for ELTs in the USA (FAA Part 91.207), in Canada (CAR 571 Appendix G), and the Europe (CAA/EuroCAE requirements). A very cost effective solution! Eliminate the need for a spectum anayzer and other costly equipment!

Don't just decode the ELT ... analyze it!

The industry is demanding higher quality from 406 beacons and is implementing more thorough periodic testing. Beacon Testers that only decode the 406 message are not suitable to meet the increasing demands from the industry to ensure the beacons are indeed operating properly. The BT100AV series provides thorough beacon measurement capabilities at an affordable price!

· Exceeds FAA, IC, and EuroCAE ELT inspections requirements

· Entire receiver is housed in a CompactFlash^TM card!

· Intuitive and easy to use software

· External coax connection accepts output of screen box or direct input (no external attenuator required)

· Measures 121.5 MHz/243 MHz parameters

· User can add text notes or audio notes to measurement

· An internal temperature sensor for measurement accuracy

· Standard 2 year calibration cycle

· Store over 200 measurements

Additional features of BT100AVtriple and BT100AVS models:

· Receives all Cospas-Sarsat past, current, and future frequency channels and decodes all Cospas-Sarsat protocols

· Direct connection power measurement accuracy to ± 1dB on 406 MHz