The ME406/P Base Pack List contains the transmitter, the auxilliary wrap-around antenna with lanyard and mounting hardware but requires selection of a remote switch, an antenna and co-ax cable to complete the ME406/P ELT system.
ARTEX ME406P
 Includes:
- 455-0775: Tether
- 453-6611:Â ELT Transmitter w/Battery
- 110-775 :Â 2 Freq Portable Antenna
- 455-7423:Â Install Kit
- 452-3075:Â Mounting Tray
- 452-6505:Â Buzzer
- Operation, Install & Mtce Manuals
This item requires selection of a remote switch, external antenna & coax cable to complete ME406P system.
ELT Has 6 AXIS G Switch.
Condition:
Operating Frequencies: 406.028 MHz ± 1 kHz Biphase L (16K0G1D) 121.5 & 243.0 MHz ± 0.005% (A3X)
Output Power: 406 MHz: 5 W (520 ms / 50 sec) for 24 hours @ -20° C to +55° C
121.5/243.0 MHz: 100 mW min for 50
hours @ -20° C to +55° C
Output Connector:BNC Female
Activation:Automatic by 4.5 ft/sec G-Switch or Manual
Battery:5 year Lithium (LiMnO2, solid cathode)
Temperature:Operating: -20° C to +55° C
Storage: -55° C to +85° C
Self Test:G-Switch enabled
406 MHz Power
Antenna/Coax Connection
Position Data Present
Low Battery
Remote Control:ON/ARM/RESET
Antenna:Rod (110-338) (<450 KTS)
Mounting Hardware:Mounting Tray P/N 452-5050
Protective Top Cover P/N 452-3052
End Cap P/N 452-5066
Other Parts:Coax cable
Buzzer (to alert ground crews of accidental activation)
Weights:ELT Transmitter: 3 LB 8 oz Max (1.6 Kg)
Mounting Tray: 7 oz (200 g)
Protective Top Cover: 6.7 oz (190 g)
End Cap: 3.8 oz (108 g)
Total Weight: 4 lb 10 OZ (2.1 Kg)
Measurements:ELT Transmitter with Mounting Hardware Installed: 11.74" (298mm) L x 3.90" (99mm) H
x 3.82"( 97mm) W"
