WALL MOUNT BRACKET/406AS

For Kannad 406AS or 406 Survival. This wall mount bracket enables the user to store the 406AS or 406Survival in an easy to reach wall mount location near en exit door.  It incorporates a safety locking pin that prevents inadvertant activation during storage yet allows a quick release from the mount.
Condition: TECHNICAL SPECIFICATIONS
TRANSMISSION
406.025 MHz
5W (37 ±2dBm)
Modulation 16K0G1D (bi-phase L encoding)
with aircraft identification code
520 or 440 ms every 50 s
121.5 MHz and 243 MHz
100mW min (+20dBm)
Modulation 3K20A3X
Audio sweep from 1420 Hz to 490 Hz
Continuous transmission
POWER SUPPLY
Solid Cathode Lithium battery pack (LiMnO2)
Autonomy over 48 hours at -20°C
Battery replacement every 6 years
PROGRAMMING
. Aircraft nationality and registration marking
. Aircraft operator designator and ELT serial number up to 4096
. Aircraft ICAO 24 bit address
. Serial number
. Pin programming connector on option
ACTIVATION
Automatically by an integrated shock sensor
(G-SWITCH)
Manually
Remotely (remote control panel in the cockpit)
SELF TEST
406 MHz RF power
Battery voltage
Frequency
Programming
TEMPERATURE RANGE
Operating: -20°C to +55°C
Storage: -55°C to +85°C
MECHANICS
Material Moulded plastic
Colour Yellow (colour compounded)
Mounting bracket with velcro strap
WEIGHT AND DIMENSIONS
1290 gr (2.84 lb) with battery, bracket and auxiliary antenna
Housing:
172 x 82 x 82 mm (6.77 x 3.22 x 3.22“)
Over all dimensions (with auxiliary antenna):
290 x 115 x 95 mm (11.4 x 4.5 x 3.7“)
TESTS & CERTIFICATION
Type AP
ED 62, ED14, JTSO-2C91a, JTSO-2C126, TSO-C91a, TSO-C126
DO183, DO204, DO160
Resistance, crush, 500 G shocks, cabin depressurization,
watertightness
CONTROL PANEL
ARM / OFF / ON switch
Bright red visual indicator
BNC antenna connector
DIN12 connector for remote control panel
OUTSIDE ANTENNA (on option)
Three frequency (121.5 / 243 / 406 MHz)
Rod or Blade depending on the aircraft speed
AUXILIARY ANTENNA
Three frequency (121.5 / 243 / 406 MHz)
Whip 400mm (15.75�)
BNC connector